Keeping your motorcycle clean and shiny is a point of pride for many owners. But motorcycles have a unique set of challenges for even the most accomplished detailers – the variety of surfaces, the contours and hard to reach areas, not to mention bugs, grease, road grime and other environmental contaminants. Glidecoat has developed our Motorcycle Ceramic Coating with the DIY enthusiast in mind – one coating that can be used on all hard surfaces, is easy to apply and maintain, and offers unmatched protection against UV, corrosion, staining, road contaminants and more.
Keeping your motorcycle clean and shiny is a point of pride for many owners. But motorcycles have a unique set of challenges for even the most accomplished detailers – the variety of surfaces, the contours and hard to reach areas, high temperature surfaces, not to mention bugs, grease, road grime and other environmental contaminants. Glidecoat has developed our Motorcycle Ceramic Coating with the DIY enthusiast in mind – one coating that can be used on all hard surfaces, is easy to apply and maintain, and offers unmatched protection against UV, corrosion, staining, road contaminants and more.
Glidecoat has had extensive field testing under extreme usage by accredited independent laboratories and has been proven to provide at least 3 years of protection under even the harshest conditions. Furthermore, under “average conditions” and through proper maintenance and aftercare, the results from our ceramic coating, in some cases, have exceeded this 3 year minimum.
Easy to apply:
Our motorcycle ceramic coating is designed for the DIY user. It doesn’t require any specialized equipment to apply such as sprayers, machine applicators, or heat/UV lamps to cure. Simply wipe on with the included application sponge and then immediately buff with a clean microfiber cloth. Allow 24-48 hours to cure before getting wet and your bike will be protected for 3 years.
Glidecoat ceramic vs wax:
While wax is the traditional method of surface protection, the truth of the matter is that wax loses its surface functionality in a matter of weeks. Wax simply sits on the surface and is easily removed through abrasion. This means that every time you wash your bike or take it for a ride, some of the wax is removed. Most manufacturers recommend waxing 3-5 times a year under average conditions. Most bikers don’t wax this often, either because of the effort involved, or because they think the wax is still working.
In addition, wax melts away at little over 100°F. If you live in an area with higher temperatures (90°F or above) or have a darker colored motorcycle, your bike is barely being protected against the heat from the sun, so it is certainly no match for high temperature surfaces, such as your bike’s exhaust. Functions such as UV blocking and stain resistance are the first to fail and then continue to diminish sharply. This means your bike is being left exposed to the elements and the surface is slowly deteriorating, fading and corroding.
Glidecoat Motorcycle Ceramic Coating protects and preserve the integrity of your bike’s surface, far outperforming traditional wax products. Once the coating is applied, it bonds directly with the surface of your bike to create a long-lasting hard coating. This allows the coating to protect your bike for up to 3 years (longer depending on storage, usage and aftercare). Our ceramic coating is also resistant to temperatures up to 1100°F. This allows you to coat high temperature surfaces such as exposed engine parts and exhaust pipes protecting them from stains, UV damage and corrosion.
Apply to all surfaces:
Compared to a car, which is largely painted surfaces with clear coat, a motorcycle has a larger variety of surfaces that need to be protected – painted panels, tanks, plastic trim, glass, chrome forks, rims, and metal frames. You need a coating that is versatile enough to meet the challenges of each of these surfaces.
In addition, many of these surfaces, such as exposed engine components or exhaust pipes, are high temperature surfaces. Glidecoat Motorcycle Ceramic Coating is designed to withstand high temperatures (1100°F/600°C) and can be used to protect even the hottest surfaces.
One of the most common misinterpretations of a ceramic coating is that they are maintenance free, or your motorcycle will not get dirty if it has a ceramic coating. That is simply not the case. That being said, the main benefit of having a ceramic coating is that your ongoing maintenance is much easier and more effective (with less effort) than using a traditional wax or sealant. We can all agree, less time cleaning and more time riding is a win.
Because the ceramic coating creates an extremely hydrophobic and super slick surface, most stains and contaminants are easily cleaned from the surface with a quick rinse. You will no longer need harsh chemicals and soaps to clean your bike. Simply wash with a gentle pH neutral soap, like our Glidecoat Nano Wash or Glidecoat Ceraglo and a microfiber wash mitt or soft bristled brush.
In addition to ease of cleaning, the coating will last 3 years (longer depending on storage and aftercare) which is 10-15x longer than wax. That means much less time spent buffing and applying wax.
IT IS VERY IMPORTANT THAT YOU FOLLOW THE INSTRUCTIONS SUPPLIED WITH ALL GLIDECOAT PRODUCTS.
We recommend a minimum of 2 coats applied to most areas of your bike’s surface. In heavily exposed or high temperature areas of the bike, we suggest 3 coats. A 30ml bottle of coating will allow you to cover up to 36 SQFT with 2 coats.
If you require recommendations from our team based on your specific needs, please do not hesitate to reach us at (561) 290-0165 and we will be glad to assist.
The benefits of Glidecoat’s Motorcycle Ceramic Coating include:
IT IS VERY IMPORTANT THAT YOU FOLLOW THE INSTRUCTIONS SUPPLIED WITH ALL GLIDECOAT PRODUCTS.
Ceramic coatings have become increasingly popular over the past few years, but even with the popularity of ceramic coatings there is still a lot of misinformation about coatings and what they can do.
Ceramic coatings are one of, if not the best product to protect and preserve the integrity of your surface, far superior to traditional wax and sealants. One of the most common misinterpretations of a ceramic coating is that they are almost maintenance free, or your boat/car/RV/motorcycle will not get dirty if it has a ceramic coating. That is simply not the case.
While ceramic coatings are extremely durable, they require ongoing maintenance to ensure that you are getting the full benefits and protection out of your ceramic coating. With that being said, the main benefit of having a ceramic coating is that your ongoing maintenance is much easier and more effective (with less effort) than using a traditional wax or sealant.
The following will explain how to properly maintain your ceramic coating to ensure you are getting the most out of your ceramic coating, and properly protect your investment.
INITIAL APPLICATION MAINTENANCE
After the application of our Ceramic Coating, it is important to let the coating fully cure before getting the wet. A full cure of our ceramic coatings is between 24-48 hours. If the boat/car/RV/motorcycle gets wet or rained on during the curing process, dry as soon as possible, and avoid leaving water to air dry to prevent potential water spots on the surface.
Allow a minimum of 48 hours before washing to ensure the coating has fully cured.
After the coating has fully cured, we recommend the ongoing maintenance of rinsing (and drying) regularly, bi-weekly washes, and spot cleaning as needed.
Ongoing maintenance is an important factor in ensuring that you get the most benefits from your ceramic coating. If a coating is too dirty, this layer of contamination (salt, dirt, bird droppings, water spots) will diminish the stain resistance and hydrophobic properties of the ceramic coating, making it more difficult to clean, defeating the main purpose of a ceramic coating.
Here are some general guidelines for ongoing maintenance of your ceramic coating:
SPOT CLEANING MAINTENANCE
In between your bi-weekly washes you may need to do some spot cleaning. Whether it’s salt build up, water spots from the rain, or bird droppings, we recommend cleaning them as you see them to make your ongoing maintenance that much easier.
Here are some general guidelines for spot cleaning:
In addition to ongoing maintenance and spot cleaning, ceramic coatings benefit from a maintenance spray every 3-4 months in southern states or once a season in northern states, such as <Glidecoat’s Shine and Shield Ceramic Spray. Shine and Shield will enhance the shine and hydrophobic effect of the surface, while adding an additional layer of protection on top of the ceramic coating to promote longevity.
Shine and Shield is a simple spray on, wipe off application.
Here are some general guidelines for applying Shine and Shield for quarterly maintenance:
An annual maintenance typically consists of a decontamination wash with Glidecoat Iron Remover to remove contamination from the surface that could be impacting the hydrophobic properties of the ceramic coating. After the Iron Remover, wash with Glidecoat Nano Wash or Glidecoat Ceraglo. Inspect the coated areas to ensure that the ceramic coating is holding up as expected. If any areas are not beading water, but still have a good shine, apply Shine and Shield to restore the hydrophobic activity on the surface.
If any of the high sun exposed areas have significantly diminished in gloss it may require a light polish to restore the shine and have one additional coat of the ceramic coating applied.
We guarantee to refund any item you are not completely happy with when you return it to us in a saleable condition within 14 days of receipt. When issuing a refund we will need to see proof of your original purchase. Refunds will be credited to your original method of payment. Please note, this policy only applies to retail customers.
For safety reasons, we cannot offer refunds on products that have been opened or used unless they are faulty or unfit for purpose. Please note, if you purchased our products through another reseller, you will need to return the products to the original place you purchased them.
How do I make a return?
Returns are simple and easy. If you need to return an item simply send the product(s), a letter as to why you are returning the products (please include contact details) and your original proof of purchase to:
931 Village Blvd. Unit 905-121
West Palm Beach, FL 33409
What about my delivery charge?
If we have made a mistake on an item sent to you or it is faulty, damaged, of unsatisfactory quality, we will refund the delivery charges you have paid to receive that item unless it was sent to you with other items which you are not returning.
Glidecoat a division of Onan Technologies Inc.’s maximum liability for or with respect to any damages of any kind to any person, property or otherwise, caused to any Customer or any other person as a result of or with respect to any proven breach of any express or implied warranty with respect to any Product; misrepresentation with respect to any Product; Product error, failure or malfunction; formula, engineering or design error; manufacturing or packaging error; labeling error; Product failure to perform; or any other act or omission of any kind whatsoever with respect to any Product, shall be limited the price paid by the Customer for the Product at the time of original purchase (not including shipping, handling, sales taxes or installation services); and Product purchase price refund shall be Customer’s only claim or remedy arising therefrom. IN
ADDITION TO AND WITHOUT LIMITATION OF THE FOREGOING, GLIDECOAT SHALL NOT BE LIABLE UNDER ANY RULE OR THEORY OF LAW TO ANY CUSTOMER OR ANY OTHER PERSON FOR (A) INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED TO LOSS OF REVENUES, LOSS OF PROFITS, LOSS OF BUSINESS, OR OTHER ECONOMIC DAMAGES, OR (B) ERRORS MADE IN THE HANDLING, STORAGE OR INSTALLATION OR APPLICATION OF ANY PRODUCT, REGARDLESS OF WHETHER ONAN WAS ADVISED OF, KNEW OR OUGHT TO HAVE KNOWN OF THE POSSIBILITY OR RISK OF SUCH LOSSES OR DAMAGES.
There are no reviews yet.