Case Study
66′ Azimut | Lucky 13


Changing your maintenance plan from quarterly or annual buff and wax to a ceramic coating may be intimidating.

The market is flooded with options claiming the product will make your yacht look brand new and easier maintenance. So, how do you find the best solution for your yacht?

This brings us to the story of Tony and his 2017 66’ Azimut. After diligently researching for the best yacht ceramic coating protection, Tony selected Glidecoat.

In this case study, we will walk through his before and after journey of selecting Glidecoat to help you and other yacht owners.

West Palm Beach, FL

As a yacht owner, you face a number of hurdles when evaluating the best options to maintain your yacht. For 30 - 40 years, a vast majority of yacht owners, selected the traditional maintenance program of buffing and waxing their yacht to protect from the harsh marine conditions.

As I am sure you have experienced yourself, wax does not hold up well over time. Wax can’t hold up for a number of reasons;

Does not bond with the pores of the surface

Wax is similar to sunscreen as it simply sits on the surface, not filling in the pores and bonding with the surface. This means that every time the boat is used, rinsed, or washed, you are effectively removing a layer of wax from the surface. As a result, salt and water will be able to get into the pores of the surface and start to cause damage

Wax begins to evaporate at 110°F

Here in South Florida, it is quite common for the surface of the yacht to be exposed to temperatures greater than 110°F. And, at this temperature, wax will begin to evaporate, whereas, the Glidecoat ceramic coating can withstand exposure to temperatures greater than 1000°F

At best: wax is only a temporary solution

Wax is truly only effective here in South Florida if you are re-applying every 6-8 weeks, and in some cases, sooner then that. As just mentioned above, with the wax not bonding directly to the surface, and therefore, common use of the boat with exposure to water abrasion, salt, cleaning, etc, will contribute to removing the wax. Without any protection on the surface, your boat will start to experience the repercussions.

Back To Tony's Story

What’s interesting with Tony’s story, is he was first exposed to ceramic coatings by a friend. His friend had applied a ceramic coating to his high end vehicle and was amazed by the results.

But, upon researching ceramic coatings, he discovered an extensive number of options for the automotive sector, but much less that are strictly focused in the marine industry.

For any yacht/boat owner who is considering a ceramic coating to be applied to your boat, make sure to thoroughly research the product.

Applying a ceramic coating to a yacht/boat is vastly different than an automobile and you should consider a coating that has been optimized for marine use.

Here at Glidecoat, we developed our yacht ceramic coating protection product since 2012 to specifically battle the harsh marine conditions. Our proprietary formula is designed to battle high temperatures, constant exposure to salt, chemicals and UV damage.

Now, let's get back to Tony's story and the process of applying our yacht ceramic coating protection product to his 66' Azimut.

The project included applying our ceramic coating to;

All stainless steel metal and railings
All exterior facing fiberglass on the top side and superstructure

The project presented a unique challenge of completing the work in the water with the use of a raft.

See the photos below, as upon first starting the work on the 66' Azimut, we encountered salt all over the hull, considerable amount of dirt and watermarks on the surface, swirl marks and scratches from previous detailing jobs and inconsistent gloss meter readings.

Without any protection to the surface, salt will be able to sit on the surface and get into the pores of the paint. Overtime, this is one of the major causes of oxidization.
Before any restoration process, the gloss meter readings were very inconsistent. Readings were as low as 38.9, with the highest reading of 75.3 on the transom.
The Process

The process of yacht ceramic coating protection is laborious and the team must be diligent to deliver quality results.

When our team is working on a yacht/boat, our process at a minimum is 5 steps and can range to 8 - 10 steps depending on the condition of the surface.

An important aspect to keep in mind with ceramic coatings, is that preparation and restoration is absolutely essential. The ceramic coating is simply locking in the condition of the surface after the restoration steps.

Our process here at Glidecoat is to use a gloss meter to measure the current shine of the surface. When we first arrive at a boat, we take gloss meter reading in various areas of the boat to get an understanding of the necessary restoration steps.

For Tony’s boat, the gloss meter readings were inconsistent and ranged from 38.9 on the hull to 75.9 on the transom.

Inconsistent gloss meter readings are normal for boats with wax because the surface is not protection from the harsh conditions and areas that are highly exposed to salt and water will suffer more.

The use of the gloss meter has numerous benefits;

1. Provides numerical evidence of the surface shine

A brand new yacht/boat out of factory will have gloss meter readings of 82 - 88. If the surface is paint, you will typically see slightly higher gloss meter readings than gel coat.

2. Check the performance of the Glidecoat ceramic coating

From our laboratory and field testing, we guarantee the gloss meter readings will not go below 30% after the ceramic coating application. Therefore, as with Tony’s boat, the gloss meter readings were registering at 97.4.

We guarantee the gloss meter readings in 18 months will be higher than 68.

With the inconsistent gloss meter readings across the yacht, we began our restoration process by using our Nano Compound with a light cutting foam pad to remove the salt, water marks and bring an added depth to the gloss of the black hull.

Diagram with four steps to show the entire restoration process including wash & prep, surface restoration, surface preparation and coating application
Glidecoat yacht ceramic coating protection is a five stage process completed by our certified applicators. After an initial assessment of the boat, we get started washing and preparing the boat and carefully apply the exclusive line of Glidecoat products. The Professional Nano Ceramic process completely restores your boat’s surface and offers the ultimate protection available.

Now comes the real transformation.

At this point, we have finished the restoration process to bring back the shine and color of the hull. Before applying our gelcoat ceramic coating, we use Surface Wipe, our version of a denatured alcohol to sterilize the surface and ensure all contaminants are removed from the surface.

With the surface now fully prepared and consistent we started the application of our gelcoat ceramic coating.

Applying two (2) coats of our marine ceramic coating, the coating will fill in all of the pores of the surface and after 8 hours of curing time, will create a protective barrier on the hull to prevent oxidization and hard water marks.

After the curing process, the hull of the yacht looks like glass!

Man holding red sponge and silver bottle and a dime size of liquid ceramic coating poured into the middle of the sponge.
A little goes a long way! Surprising how a little of product can go a long way. When applying the coating to a 2' by 2' area, you should pour approximately the size of a penny on the applicator sponge.
The Result

Once finished, the shine and finish of the black hull is second to none! Before beginning the Glidecoat Ceramic Coating process, gloss meter readings ranged from as low as 38.9 to 75 on the transom. After the Glidecoat process, we had gloss meter readings as high as 97.4!

Not only does Tony's yacht have an unbelievable shine, it is now protected with the best ceramic coating for marine! Tony can now enjoy the beautiful look of his black 66' Azimut without having to worry about constantly washing and having it detailed every 60-90 days here in Florida, to keep it looking great!

Before having a ceramic coating applied to your yacht/boat, make sure to call Glidecoat.

Click Here to reach out to the Glidecoat team to help you on the best way to protect your boat.

97.4 gloss meter reading on black hull of 66' Azimut

After complete restoration process to the paint and applying two (2) coats of the Glidecoat ceramic coating, we took gloss meter readings to measure the change. The gloss readings climbed from as low as 38.9 to a whopping 97.4!

Transom of 66' Azimut with Lucky 13

After the yacht ceramic coating protection application, the pores of the surface are protected from the harsh marine elements.

Related Products
  • Certified Pro Black Friday Free Bundle


    Add to cart
  • Certified Pro Black Friday Shine & Shield Bundle


    Add to cart
  • Glidecoat Trucker Hat


    Classic five-panel mesh trucker cap with plastic adjustable snapback. Features the Glidecoat logo in red on the front foam panel, slightly curved red bill and mesh back for maximum breathability.

    Add to cart
  • Glidecoat Your Boat T-Shirt


    Classic fit cotton t-shirt with Glidecoat logo on the front and Glidecoat Your Boat design on the back. Available in M-L-XL-2XL.

    Select options
  • Glidecoat Long Sleeve Tee


    These high-performance tees feature the Glidecoat logo in white on the chest and along the right sleeve. Soft polyester performance tee with moisture-wicking and UV protection.

    Select options
  • Heavy Cotton Canvas Boat Tote


    Glidecoat branded canvas boat tote bag with an embroidered logo on the front pocket. Made from durable 24 oz. cotton canvas with 30" handles and top zippered closure.

    Add to cart
  • Glidecoat Beach Towel


    100% cotton striped beach towel embroidered with the Glidecoat logo. The perfect towel for the beach, boating or any outdoor water activity. Measures 27.5" W by 55" L.

    Add to cart
  • Glidecoat Your Boat Poster


    High-quality poster printed on glossy photo paper. Sized 24" wide by 36" high. This poster is perfect for indoor use in your shop or office.

    Add to cart
  • Marine Ceramic Top Coating Kit - 20' Boat

    Marine Ceramic Top Coating Kit


    Never use wax again! The Glidecoat Top Coating Kit creates a hard protective barrier over gel coat or paint, giving your boat a showroom finish while making maintenance a breeze.

    Select options
  • New Boat Bundle


    Even factory new boats will have visible swirl marks and light scratches. This bundle has everything you need to prep and apply ceramic coating to your brand new boat.

    Add to cart
  • Maintenance Bundle

    Maintenance Bundle


    Maintain that Glidecoat shine with the ultimate ceramic maintenance bundle. The included products have been designed to safely clean, extend the life, and enhance the protective properties of your ceramic coating.

    Select options
  • RV Cap Protection Kit

    RV Cap Kit


    Designed for your RV's front cap to restore a better-than-new shine that also protects against UV damage and road contaminants.

    Select options
  • RV Ceramic Top Coating Kit

    RV Ceramic Top Coating Kit


    Designed specifically for DIY application on your RV's gel coat, fiberglass or paint. Restore and protect the surface of your RV for a better-than-new shine that also protects against UV damage and road contaminants.

    Select options
  • Auto 9H Ceramic Coating Kit - Midsize

    Auto Ceramic Kit


    Glidecoat Auto Kit is all you need to provide a long lasting shine that is quick and easy to apply and repels dirt, salt, road contaminants, bugs, stains and rain, providing the best protection for your vehicle.

    Select options
  • Inflatable Kit


    Protect your inflatable with our nano ceramic coating specifically designed for both PVC and CSM (Hypalon) to reduce UV damage and moisture damage.

    Select options
  • Saltwater Bundle


    If your boat is in saltwater, you know the pain of trying to remove salt from the surface of your boat. This bundle includes Nano Wash and X-Salt, which when combined create a powerful cleaning solution that easily removes salt build-up.

    Add to cart
  • Sample – Pro Marine Ceramic Coating – New Formula


    Designed with the Professional in mind, we have delivered the ultimate protective coating for gel coat and paint, giving your customer’s boat a better-than-new finish.

    Select options
  • Pro Marine Ceramic Coating


    Designed with the Professional in mind, we have delivered the ultimate protective coating for gel coat and paint, giving your customer’s boat a better-than-new finish.

    Select options
  • Marine Ceramic Coating


    Glidecoat’s Marine Ceramic Coating is a unique product that provides a high-performance surface using nano-ceramic materials

    Select options
  • RV Ceramic Coating


    Glidecoat’s RV Ceramic Coating provides a high-performance surface for your RV that far outlasts traditional wax products.

    Select options
  • Auto Ceramic Coating


    Glidecoat Auto Ceramic Coating is all you need to provide a long-lasting shine that is quick and easy to apply and repels dirt, salt, road contaminants, bugs, stains, and rain, providing the best protection for your vehicle.

    Add to cart
  • Aviation Ceramic Coating


    Designed to provide superior protection for your airplane, and create a hydrophobic surface which repels dirt, improves aerodynamics and increases fuel efficiency.

    Select options
  • RPL Ceramic Coating - 120ml

    RPL – Repellent Protective Layer


    Say good-bye to black streaks and exhaust stains. Glidecoat RPL is an outstanding final finishing top coat to combat problems with persistent exhaust soot or other carbon-based airborne pollutants.

    Select options
  • Inflatable Ceramic Coating - 120ml

    Inflatable Ceramic Coating


    Protect your inflatable with our ceramic coating specifically designed for both PVC and CSM (Hypalon) to reduce UV damage and moisture damage.

    Select options
  • Glidecoat Pontoon Ceramic Coating

    Pontoon Ceramic Coating


    Tested and proven to provide superior protection for your pontoon against corrosion and oxidation caused by exposure to UV, salt, rain and more.

    Select options
  • Vinyl Ceramic Coating


    Vinyl Ceramic Coating has been developed for vinyl that is exposed to the elements, such as vinyl cushions in a marine environment, but also has uses in the home and auto sectors.

    Select options
  • Glidecoat Trim Ceramic Coating - 50ml - Front View

    Trim Ceramic Coating


    Glidecoat Trim has been specially formulated to bond directly to the pores of exterior textured plastic surfaces such as black bumpers, windshield cowls, side moldings, bed rails, tonneau covers and more.

    Add to cart
  • Glass Ceramic Coating - 50ml

    Glass Ceramic Coating


    Glidecoat's Glass Ceramic Coating provides superior protection for your glass windows and car/boat windshield. With it's anti-static qualities, it will require less cleaning and given its hydrophobic properties, rain will bead right off.

    Select options
  • Ceraglo - Premium Polymer Infused Soap

    Ceraglo Polymer Infused Soap


    Ceraglo is the perfect after-care soap for any ceramic coating. Ceraglo is a pH neutral premium soap that produces a high foam content and the added polymer provides an additional layer of protection to help extend the life of your ceramic coating.

    Select options
  • Shine & Shield V2.0 - Marine

    Marine Shine & Shield 2.0 Ceramic Spray


    Marine Shine & Shield 2.0 pushes the boundaries of a ceramic spray with 42% active ingredient, giving you ceramic protection for up to 6 months with a simple application.

    Select options
  • Shine & Shield – Free with Purchase of Ceramic Coating


    Add to cart
  • RV Shine & Shield 2.0 Ceramic Spray - 16oz

    RV Shine & Shield 2.0 Ceramic Spray


    RV Shine & Shield 2.0 is a must-have for RV owners. Simply spray on and then lightly buff with a microfiber cloth and your RV will shine like new, resist stains and bugs, stay clean longer, and be protected from UV damage.

    Select options
  • Auto Shine and Shield Ceramic Spray

    Auto Shine & Shield 2.0 Ceramic Spray


    The new formulation of Auto Shine & Shield provides a protective layer that is extremely hydrophobic making the surface of your car easy to maintain for up to 6 months.

    Select options
  • Iron Remover


    Glidecoat Iron Remover dissolves and safely removes the ferrous metal iron contamination from rail dust, brake dust, air pollution and industrial fallout. Safe to use on all exterior painted surfaces, wheels, plastic and chrome.

    Select options
  • X-Salt Concentrated Salt Remover

    X-Salt Concentrated Salt Remover


    X-Salt is Glidecoat’s answer to salt build-up on the surface of your boat, car or RV. Glidecoat X-Salt is safe to use on all metals, gel coat, painted surfaces, fiberglass, rubber, chrome, glass, plastic and most any surface exposed to salt.

    Select options
  • Glidecoat Nano Wash - 16oz

    Nano Wash


    The product produces a high foam content, which breaks the bond between the dirt film and your boat’s gelcoat or paintwork and lubricates dirt particles minimizing surface abrasion.

    Select options
  • Nano Compound – Medium Cut


    Glidecoat’s Nano Compound is a medium cut compound, which contains no wax or silicone and is great for those that are looking for the perfect finish without the worry of swirl lines or burning.

    Select options
  • Glidecoat Nano Compound Heavy Cut

    Nano Compound – Heavy Cut


    A heavy-cut formulation of Glidecoat Nano Compound that combines the workability of polish with the cutting action of compound! Formulated to provide fast cut and restore luster and shine to damaged gel coat or paint.

    Select options
  • Nano Polish


    Nano Polish offers a fast, easily achievable, perfect finish, using fewer products, and fewer stages than traditional polishing systems, on both fiberglass and marine paint.

    Select options
  • Surface Wipe


    Surface Wipe is a one-step preparation product that removes oils and contaminants before applying Gildecoat ceramic coating or polishing applications.

    Select options
  • All Purpose Cleaner & Degreaser


    Our all-purpose cleaner has a safe and unique low suds cleaning formula that is strong enough for degreasing an engine, to gently cleaning: leather, vinyl, carpet, rubber, vinyl tops, fabric seats, and more...

    Select options
  • Heavy Duty Cleaner


    Glidecoat's Heavy Duty Cleaner is a strong, paintwork/gel coat safe, wax remover. Also removes polishing oils, buffing residue, mold, mildew, dissolves dirt & grime, and removes tree sap safely and effectively.

    Select options
  • Application Sponges


    Glidecoat's Application Sponge is the perfect ceramic coating applicator! The sponges are extremely durable, allowing you to coat for hours at a time without needing a new sponge, while also not absorbing too much of that precious coating.

    Add to cart
  • Microfiber Applicator Sponge - 4 Pack

    Microfiber Applicator Sponges


    Made from extremely soft microfiber wrapped around a foam sponge, these microfiber sponges allow you to apply ceramic coating to all types of surfaces, including , paint, gel coat, chrome, trim and more without the risk of scratching or swirling.

    Add to cart
  • Maroon Medium Cut Foam Pad


    Glidecoat’s maroon medium-cut foam pad is designed for extreme versatility and durability. It can be used with our entire range of compounds and polishes to give you optimal results. The maroon medium-cut foam pad removes oxidization, swirl marks, li

    Select options
  • Yellow Foam Finishing Pad


    Glidecoat’s yellow foam polishing pad is a soft foam pad that provides a little cutting action to remove any remaining scratches or swirl marks while providing a showroom shine!

    Select options
  • Premium Microfiber

    Premium Microfiber Towels (12 and 24 packs)


    A heavy cloth with standard pile on one side and double length pile on the reverse side. The extra pile makes for an incredibly soft and absorbent towel which is an excellent match for detailing.

    Select options
  • Gift Card


    Give the gift of a Glidecoat Shine and The Ultimate in Surface Protection. Let them get exactly what they want from our range of ceramic coatings and surface preparation products.

    Select amount