February 26, 2019

Case Study 35′ Scout – Restore Black Hull With Ceramic Coating Application

Overview
1

The team at Seven Seas Yacht Sales reached out to us on the opportunity to restore a highly oxidized 35' black hulled Scout with our ceramic coating.

The five year old Scout had been neglected from routine maintenance and the color of the hull has suffered severe oxidization from the harsh South Florida elements.

Boat Brand:
Scout
Year:
2014
Length Overall:
35'
Location
Ft. Lauderdale, FL
Challenge
2

Dark colored hulls present a significant challenge for boat owners to keep clean, prevent sun and salt damage, which typically leads to routine buff and wax jobs. Len at Seven Seas Yacht Sales contacted us after watching first hand the application process of another 38' Black Hulled Scout and the tremendous advantages of a ceramic coating to protect the black hull.

As we illustrate in all of our case studies, videos and other documentation, the prep work is essential to be successful with a ceramic coating application.

This Scout presented the tough challenge of dealing with severe oxidization and porous surface.

24 gloss meter readings on the black hull of the 35' Scout before any restoration
Oxidization on the black hull 35 Scout before Glidecoat ceramic coating application
The starboard of the 35' Scout before any restoration steps. As you will note, a small section with an initial test spot to test how much restoration was required on the oxidized hull.
The Process
3

Due to the condition of the black hull, we had to complete several additional steps to the ceramic coating process. As you saw in the photos above, the first step any time we work on a boat, is to take photos and gloss meter readings.

We use those photos and gloss meter readings for numerous reasons;

1). Use in the case studies to show the transformation of the boat from before and after
2). The gloss meter readings gives us an indication of how much restoration is required and if the readings meet our standards

Our goal on each boat is to get the readings as high as possible and most cases reach the mid 80's to even higher than 100.

For a typical Glidecoat ceramic coating application, we complete 6 steps. Those steps include;

1). Wash
2). Compound
3). Polish
4). Sterilize the surface
5). 1st ceramic coating application
6). 2nd ceramic coating application

With the heavy oxidization to the black hull of the Scout, we were forced to complete these steps in order to achieve gloss meter readings of 88.

1). Wash
2). Heavy compound with a wool pad
3). 2nd pass with heavy compound with a wool pad
4). Medium compound with firm foam pad and random orbital
5). Medium compound with soft foam pad and random orbital
6). Sterilize the surface
7). 1st ceramic coating application
8). 2nd ceramic coating application
9). 3rd ceramic coating application

This boat presented a rare instance we were required to complete a third ceramic coating application to the hull. This was direct result of the how porous the surface was.

During the first application of the ceramic coating, the coating had not fully filled in the pores of the surface and a result, required an additional coat.

The Result
4

The dark colored hulls can be challenging during the restoration process to get the surface back to optimal condition prior to the ceramic coating application. As a result of the additional prep steps and three coats of the ceramic coating, the gloss meter readings jumped from 24 to 88.

Now the black hull will be protected from the harsh South Florida conditions and make maintenance a breeze!

88 gloss meter reading after Glidecoat ceramic coating application

88 gloss meter reading after complete restoration and Glidecoat ceramic coating application.

Glass look finish to the black hull 35' Scout after ceramic coating application.

Glidecoat Your Boat?

Interested to see the transformation of your boat? Connect with us to discuss the process.

Contact Us

Your Cart
0